Specifications

Frequency Range 824-2400 MHz
VSWR < 1.4
Input N Female
Gain 2 dBi at (824-960) MHz

5 dBi at (1710-2400) MHz

Polarization Vertical
Impedance 50 Ω

Mechanical Dimension

Radiating Element Material Brass
Radome Material ABS
Radome Color Ivory White
Dimension (160×85) mm
Weight 340 g

Installation

Installation Tool: Electrical Drill
Steps of Installation
  • Drill a 20 by 22mm hole in the ceiling on the position of installing antenna
  • Open antenna pack, take out antenna and throw off plastic guard cap of the connector. Remove out chuck, thrill the antenna bush along with the cable and connector through the drill hole revolve chuck back of the bush.

Notice

  • Make sure the diameter of the hole in the ceiling is 20mm by 22mm (recommended), when installing antenna.
  • Make sure chuck is screwed tightly and antenna is fastened on the ceiling.
  • Use water proof adhesive tape to seal the connector after finishing connection

Clamp has to be used if false ceiling is not there. Hole of Z Clamp has to be fixed in the